AirLive Ether-GSH24TW - Manual (Page 23)

23
View Trap: The Trap function can receive the events that
happen from the Web Management Switch in the Monitor List.
There is a light indicator behind the “View Trap” button, when
the light indicates in green, it means that there is no trap
transmitted, and else when it indicates in red, it means that there
is new trap transmitted, this is to remind us to view the trap.
(Figure 8)
Figure 8 .
When the “View Trap” button is clicked, a Trap Information
window will pop out, it will show the trap information including
the Symbol, Time, Device IP and the Event occurred. (Figure 9)
The symbol “ ” represents the trap signal arise, this symbol will
disappear after you review and click on the event record.
Figure 9.
Note: In order to receive Trap information, switch has to be configured with Trap IP
and Trap Events in Web browser, which are available in the Trap Setting Menu (see
Page 45 for detail).
Add Item: To add a device to the Monitor List manually, enter
the IP Address of the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.