AirLive Ether-GSH24TW - Manual (Page 39)

39
Backup Setting
The backup tools help you to backup the current setting of the
Switch. Once you need to backup the setting, press the
“Backup” button to save the setting.
To restore a current setting file to the device, you must specify
the backup file and press “Restore” button to proceed the
setting of the recorded file.
Figure 28. Backup Setting
Note: when restoring a recorded file, the current password will not
be erased.
Reset Setting
The Factory Reset button helps you to reset the device back to
the default setting from the factory. Be aware that the entire
configuration will be reset, the IP address of the device will be
set to default setting 192.168.0.1.
Figure 29. Reset Setting