AirLive Ether-GSH24TW - Manual (Page 24)

24
Device Setting
You can set the device by using the function key in the Device
Setting Dialog box.
Configuration Setting: In this Configuration Setting, you can
set the IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP
Address), System name and Location.
Select the device in the Discovery list or Monitor List and press
this button, then the Configuration Setting window will pop out
as Figure 10, after filling up the data that you want to change,
you must fill up the password and press the “Set” to process the
data changed immediately. The default password of this 24-Port
10/100/1000Mbps Gigabit Ethernet Web Smart Switch
configuration is “admin”.
Figure 10. Configuration Setting