AirLive Ether-GSH24TW - Manual (Page 32)

32
Speed/Disable:
This setting has six modes—100M Full, 100M Half, 10M Full,
10M Half, Auto and Disable—for speed or port disable
selections.
Flow Control:
This setting determines whether or not the Switch will be
handling flow control. Set Flow Control to Enable for avoiding
data transfer overflow. Or it sets to Disable; there is either no
flow control or other hardware/software management.
When the port is set to forced mode, then the flow control will
automatically set to Disable.
QoS:
In some ports that need to have a high priority to manage the
data transfer, QoS should be change. Set the port’s QoS to high
to determine the port will always transfer their data first.
VLAN Settings (Virtual Local Area Network)
Group individual ports into a small “Virtual” network of their own
to be independent of the other ports. To add a VLAN group,
press “Add Group” button, the new VLAN configuration window
will pop out, you can fill in the description in order to describe
this VLAN Group, check on the port to be a member to this
VLAN Group, and press “Apply” button to execute the setting.
Figure 19. VLAN Group Settings