AirLive IP-150CAM - Manual (Page 13)

2. Hardware Installation
3 AirLive WN-150CAM/IP-150CAM User’s Manual
Item Requirements
CPU Pentium 4 1600MHz (or equivalent AMD)
Graphic Card 64 MB RAM graphic cards(or equivalent on-board graphic cards)
RAM 512 MB
Operating System Windows 98, Windows ME (Please see Note)
Windows2000, 2003, XP, Vista, Windows 7, Mac OS X Leopard
Web Browser Internet Explore 6 or later
y Ventilation
To prevent heat buildup, do not block air circulation around the device.
y Cleaning
Use a soft, dry cloth to clean the external surfaces of the device. Stubborn
stains can be removed using a soft cloth dampened with a small quantity of
detergent solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or thinners as they
may damage the surface
2.2. Minimum System Requirement
Note
1. If you are using Windows 98 or Windows ME, please install IP Installer
before using WEB UI to ensure the system runs normally.
2. If you can't view the record video file, please install Xvid codec while
installing Intelligent IP Installer. (For Windows 98, ME or 2000 server, the
codec might not work properly. You’ll need to download Xvid codec 1.0 from
the internet.