AirLive IP-150CAM - Manual (Page 60)

5. Setting
AirLive WN-150CAM/IP-150CAM User’s Manual 50
y
POP before SMTP
Select if POP before SMTP authentication is necessary when an e-mail is
sent.
- POP server name
Type the POP server name of the user.
- User name, Password
Type the user name and Password of the user.
y
Recipient e-mail address
Type up to 3 recipient e-Mail addresses.
y Administrator e-mail address
This address is used for reply mail and sending system messages from the
SMTP server.
y Subject
Type the subject/title of the e-Mail.
y Message
Type the text of the E-mail.
Note
If you use g-mail as your mail server, you should set 587 as your port number
and tick SSL box.
5.4.2.2. Alarm Sending
Set to send the mail with connection to the alarm detection by the built-in
motion detection function. Select On to send the image file to SMTP server
linked with the alarm detection.