AirLive IP-150CAM - Manual (Page 16)

2. Hardware Installation
AirLive WN-150CAM/IP-150CAM User’s Manual 6
POWER LED D
Steady Red Boot up process
Steady Blue Boot up complete
Steady Blue → Flash Purple Push WPS button and ready for
connecting wireless router/AP
Flash Purple → Steady Blue WPS configuration finished
Flash Purple → Steady Red 30 secs WPS configuration failed
Steady Blue → Unlit Push reset button and then reset
Steady Blue → Unlit → Steady Blue Push reset button for at least 5 secs
and then reset to default
Steady Blue → Flash Purple Firmware upgrade
ETHERNET/WIRELESS LED
Flashing blue Wired packets transmission
Unlit No transmission
2.4.2. Bottom View