AirLive IP-150CAM - Manual (Page 52)

5. Setting
AirLive WN-150CAM/IP-150CAM User’s Manual 42
1. See the wireless setting page. Then click “Refresh”. All access points (AP)
around you will show up.
2. Select the AP you wish to connect.
3. Enter password at active transmit key if you need. If you don't know the
setting of the wireless AP, please ask your network administrator.
4. Choose the option of Obtain an IP address automatically (DHCP).
5. Choose the option of Obtain DNS server address automatically.
y
Use the following IP address
Select this when the fixed IP address is set.
- IP address: Enter the IP address of the device.
- Subnet mask: Enter the subnet mask.
- Default gateway: Enter the default gateway.
y
Use the following DNS server address
Select this when you set the fixed address as the IP address of DNS server.
- Primary DNS server: Enter the IP address of the primary DNS server.
- Secondary DNS server: Enter the IP address of the secondary DNS
server, if necessary.