AirLive IP-150CAM - Manual (Page 37)

5. Setting
27 AirLive WN-150CAM/IP-150CAM User’s Manual
5.1.5. Initialize
y
Reboot
Reboot this IP Camera and it takes two minutes to reboot this IP Camera.
y Factory Default
Reset this IP Camera to the factory default setting. Don't turn off this IP
Camera until the device reboots.
y Backup Setting
Backup the setting data of this IP Camera.
y Restore Setting
Click “Browse” to restore setting and then restart automatically.
y
Firmware Update
Click “Browse” to upgrade firmware.
y
Upload Language Pack
Upgrade the device language pack.
Note
Use only upgrade files that are special for this IP Camera. Otherwise problems
may occur. Don't turn off the IP Camera power or disconnect the network until
the upgrading is completed.