Mounting and cable connecting – AirLive IP-150CAM User Manual
Page 17
2. Hardware Installation
7
AirLive WN-150CAM/IP-150CAM User’s Manual
y
Power Connector
- For connection of 12V DC input.
y
Reset
– When the device is empowered, press the Reset Button to reboot
the device, or hold the Reset Button for 10 seconds to set the device
settings back to factory default.
y
WPS –
Click to easily connect to your router equipped with WPS. (Only
WN-150CAM)
y
Audio Out (Speaker)
- To support audio out with earphones or speakers
y
Network Connector
- For connection to the Ethernet via RJ-45 standard.
2.5. Mounting and Cable Connecting
y
Wall and Ceiling Mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.