AirLive N.Plug - Manual (Page 33)

4. Web Configuration
AirLive N.Plug User’s Manual
28
supported rate.
2.4GHz (G+N): 802.11g supported rate and 802.11n
supported rate.
2.4GHz (B+G+N): 802.11b, 802.11g and 802.11n supported
rate.
User can select WDS disable/ WDS enable/ WDS only from the
pull-down list.
WDS
Network Name
(SSID) A SSID is referred to a network name because essentially it is a
name that identifies a wireless network(case-sensitive).
Multiple APs
This page shows and updates the wireless setting for multiple
APs
User can set up the multiple AP here. To enable one of the APs
from 1~4, then setup the wireless settings from the pull-down list.
Channel Width This function will be available under 2.4GHz (N), 2.4GHz (G+N),
2.4GHz (B+G+N) mode. Select 20MHz the channel number will
be form 5~11 and auto; Select 20/40MHz channel width the
channel number will be form 1~11 and auto. Default is 20/40MHz.
Control Sideband This function will be available under 2.4GHz (N), 2.4GHz (G+N),
2.4GHz (B+G+N) mode. Select upper or lower form the pull-down
list, default is upper.
Channel Number The channel number base on the channel width you select.
Broadcast SSID Enabled: This Wireless Router will show its network name(SSID)