2 advanced settings – AirLive N.Plug User Manual
Page 41
Advertising

4. Web Configuration
AirLive N.Plug User’s Manual
36
Client
Disable Wireless
LAN Interface
Check to disable the wireless function. If the wireless LAN
interface be disabled, the WLAN LED on the top will be off.
Band
You can choose one mode of the following you need. The default
is
2.4GHz (B+G+N) mode.
2.4GHz (B): 802.11b supported rate only.
2.4GHz (G): 802.11g supported rate only.
2.4GHz (N): 802.11n supported rate only.
2.4GHz (B+G): 802.11b supported rate and 802.11g
supported rate.
2.4GHz (G+N): 802.11g supported rate and 802.11n
supported rate.
2.4GHz (B+G+N): 802.11b, 802.11g and 802.11n supported
rate.
Remote SSID
In Repeater Mode, the remote SSID should be the same with the
Advertising