AirLive N.Plug - Manual (Page 8)

1. Introduction
AirLive N.Plug User’s Manual 3
1.4 Physical Details
1.4.1 Status LED/WPS
WPS button
Press the physical WPS button on the Wireless Router once, or go
to enable the WPS function via web configuration (Go to Wireless >
WPS page), then the LED will start to flash. Please make a
connection with other WPS supported device within 2 minutes.
LED Behavior
LED Printed Color Behavior Indication
Off Power off
On Power on POWER PWR Green
Flashing System is resetting.