AirLive N.Plug - Manual (Page 71)

4. Web Configuration
AirLive N.Plug User’s Manual
66
DHCP Client
Range
The starting address of this local IP network address pool. The pool
is a piece of continuous IP address segment, the device will
distribute IP addresses from 192.168.1.100 to 192.168.1.200 to all
the computers in the network that request IP addresses from DHCP
server (Router). The end IP address maximum is 253.
Note:
If “Continuous IP address pool starts” is set at 192.168.1.1 and the
“Number of IP address in pool end” is 253, the device will distribute
IP addresses from 192.168.1.100 to 192.168.1.253 to all the
computers in the network that request IP addresses from DHCP
server (Router).
Click Show Client button to show Active DHCP Client Table. The
table shows assigned IP address, MAC address and time expired for
each client.
Refresh: Click this button to refresh the table.
Close: Click this button to close the window.
Static DHCP Check the box to enable the Static DHCP function, default setting is
disabled.
When set to enabled, user can click Set Static DHCP button to set
the Static DHCP function.