AirLive POE-FSH8PW - Manual (Page 16)

2. Installation of the Switch
AirLive POE-FSH8PW User’s Manual 11
2.8 Reset to Default
When you forgot your IP or password, please use the reset button for the factory default
setting? Please take the following steps to reset the Web Smart Switch back to the original
default:
Step 1. Turn on the POE-FSH8PW.
Step 2. Press and hold the reset button continuously for 10 seconds and release
the reset button.
Step 3. The switch will reboot for 5 seconds and the configuration of switch will
back to the default setting.
Key in the user ID and the password to pass the authentication; the default ID and
Password is as below,
IP Address: 192.168.2.1
ID: admin
Password: airlvie