AirLive POE-FSH8PW - Manual (Page 36)

4. Web Management
AirLive POE-FSH8PW User’s Manual 31
4.6.1 VLAN Mode
You may select the VLAN Mode of the switch. Port-based VLAN is for separating traffic only
on this single switch. There is no handover of network traffic within VLAN groups to other
switches. For the handover to other switches use Tag Based VLAN. In VLAN Mode you can
switch from Tag to Port Based VLAN. Port Based VLAN is the default mode.
After having switched to Tag Based VLAN Mode, the screen changes. On this screen you
can now define and configure your Up- and Downlink ports. These are important since here
the handover between the switches of your network takes place.
„ VLAN Mode: Displays VLAN mode: port based/Tag based VLAN. Here you can also
switch back to Port Based VLAN Mode
„ Add tag means the outgoing packet of the selected port will be inserted a 802.1Q tag.
Use this setting for your Up- and Downlink Ports in your VLAN Tagged Network.
„ Original means the outgoing packet of the selected port keep the original packet
received at the source port. This is the default setting when starting VLAN configuration.
You should change to either Add or Remove Tag.
„ Remove tag means the 802.1Q tag of the outgoing packet of the selected port will not
be sent. Use this setting for your Network Connections to PCs. Only packets of the
VLAN Group the Port is member of will be sent.