AirLive POE-FSH8PW - Manual (Page 45)

4. Web Management
AirLive POE-FSH8PW User’s Manual
40
4.10 Trunk Setting
This page is used to set trunk group for load balance and auto-backup.
The smart switch supports two trunk group, each trunk consists of 2~4 ports. Trunk hash
algorithm can be selected according to 4 different methods.
„ Port ID: Among the trunk member ports, the packet will be distributed based on the port
ID.
„ SA: Among the trunk member ports, the packet will be distributed based on the source
MAC address.
„ DA: Among the trunk member ports, the packet will be distributed based on the
destination MAC address.
„ DA&SA: Among the trunk member ports, the packet will be distributed based on the
XOR calculation result of the source MAC address and the destination MAC address.
4.11 Backup/Recovery
This function provides the user with a method to backup/recovery the switch configuration.
The user can save configuration file to a specified file. If the user wants to recover the
original configuration, which is saved at the specified path, just enter the password and
then press the “Update” button. Finally the original configuration of the switch will be
recovered.