AirLive POE-FSH8PW - Manual (Page 28)

4. Web Management
AirLive POE-FSH8PW User’s Manual 23
4.5.1 Port Configuration
In Port Configuration, you can set and view the operation mode for each port.
„ Auto: Enable and Disable. Being set as ‘Enable’, the Speed, Duplex mode, Pause,
Backpressure, TX Capability and Address Learning are negotiated automatically. When
you set it as ‘Disable’, you have to assign those items manually.
„ Speed: When the Auto-Negotiation column is set as Disable, users have to set the
connection speed to the ports ticked.
„ Duplex: When the Auto-Negotiation column is set as Disable, users have to set the
connection mode in Half/Full to the ports ticked.
„ Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex mode.
„ Backpressure: Flow Control for connection at speed of 10/100Mbps in Half-duplex
mode.
„ TX Capability: When the Auto-Negotiation column is set as Disable, users have to set
this column as Enable or Disable.
„ Addr. Learning: When the Auto-Negotiation column is set as Disable, users have to set
this column as Enable or Disable.
„ Select Port No.: Tick the check boxes beside the port numbers being set.
„ Click "Update" to have the configuration take effect.