AirLive POE-FSH8PW - Manual (Page 38)

4. Web Management
AirLive POE-FSH8PW User’s Manual 33
So enter “100” in the field right of VID Setting, then select or deselect which ports are
member of that group. Your up- and downlink ports need to member of every existing group!
Then click on add. The new group with its setting will be displayed at the bottom of the
screen.
With the PVID Setting you define to which VLAN group incoming traffic belongs. Consider
the example that Port 1 is member of group 100 and 101. A simple PC is connected to Port
1. If that PC is now sending out data, with PVID you define if that data is for group 100 or
101.
4.6.3 Multi to 1 Setting
Multi-to-1 VLAN is used in CPE side of Ethernet-to-the-Home and is exclusive to VLAN
setting on”VLAN member setting“. When VLAN member setting is updated, multi-to-1
setting will be void and vice versa. The “disable port” means the port which will be
excluded in this setting. All ports excluded in this setting are treated as the same VLAN
group.
The port 5~port 7 of THE DEVICE only forward packets to port 8. The port 8 is set to home.
The VLAN and port 5~ port 8 are the member of the VLAN group for multi-to-2 setting.