AirLive WLA-5000AP v3 - Manual (Page 39)

AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
33
3.4.2 Repeater Node Settings
Advanced Settings>>Operation Mode
To set a device as Repeater, the device has to be first defined as repeater operation mode.
Select “Repeater” mode and then enter the “Remote SSID”, this is the SSID of AP node’s SSID.
Click on the “Repeater” radio button
Key-in the SSID of upper node’s SSID.
Click APPLY button.
Next step is to set the AP configuration for client device for Repeater node.