Client adhoc mode settings, 1 wireless settings – AirLive WLA-5000AP v3 User Manual
Page 49
Advertising
AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
43
3.7
Client Adhoc Mode Settings
Advanced Setting >> Operation Mode >> Client Adhoc
Select “Client Adhoc” mode and then click APPLY button.
3.7.1 Wireless Settings
Advanced Setting >> Wireless Settings
RTS Threshold: RTS/CTS frames are used to gain control of the medium for transmission. Any unicast (data
or control) frames larger than specified RTS threshold must be transmitted following the RTS/CTS handshake
Advertising