AirLive WLA-5000AP v3 - Manual (Page 67)

4. Manage the WLA-5000AP v3
AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
61
4.2 System Log
Device Status >> System Log
The WLA-5000AP v3 maintains a system log that you can use to track events that have occurred in the
system. Such event messages can sometimes be helpful in determining the cause of a problem that you may
have encountered.
You can select System Log on the left side of the Device Status window to view log events recorded in the
system. The System Log entries are shown in the main screen along with the log level, the severity level of
messages that are being displayed (lower is severer), and the uptime, which is the amount of time since the
WLA-5000AP v3 was boot-up.
4.3 Wireless Client Table
Device Status >> Wireless Client Table
The wireless client table lists the current wireless clients and its MAC address, state, and traffic statistics. You
can check this table by clicking Wireless Client Table at the left side of the Device Status window.