AirLive WN-300PCI - Manual (Page 22)

18
2-2-1-2 Connect to an Access Point
If the wireless access point you wish to connect is found, you can establish connection with
it by clicking ‘Connect’ button. Instructions will be given as follow:
1. Click the wireless access point or network device you wish to connect, it will be
highlighted, then click ‘Connect’.
If the access point you selected does not use encryption, you’ll be connected to this
wireless access point within one minute. If the access point you selected uses
encryption, please proceed to step 3.
2. If the wireless access point does not have SSID, you’ll be prompted to input it now.
Please ask the owner of wireless access point for the exact SSID and input it here, then
click ‘OK’ when ready. If the SSID you provided here is wrong, you’ll not be able to
connect to this access point.