AirLive WN-300PCI User Manual
Page 49
45
3. The PIN code of your wireless network card is an eight-digit number located at the
upper-right position of configuration utility. Remember it, and input the number to your
wireless access point as the WPS PIN code (Please refer to the user manual of your
wireless access point for instructions about how to do this).
4. Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access
point with correct PIN code is found, you’ll be connected to that access point.
5. You may have to click ‘PIN’ for few more times to try again. If you still can not connect to
access point by this way, please make sure the PIN code you provided to access point
is correct.
There are also some options available for WPS configuration:
WPS associate IE: Check this box to send the association request with WPS IE during
WPS setup. This is optional and you can use default value if you don’t know what will be
affected.
NOTE: If you experienced problem with the pin code provided here, you
can click ‘Renew’ to get a new pin code.