AirLive WN-300PCI - Manual (Page 31)

27
you can select the certificate here.
Server
Certification tab Use this tab to use server-based certification. Please select a CA
(Certificate Authority) from dropdown menu. If intermediate
certificates are allowed, please select ‘Allow intermediate
certificates’. Also, if you need to specify CA server’s name, you
can specify it in ‘Server name’ field. You can select ‘Server name
must match’, so the CA server’s name must be the same with the
value you set in ‘Server name’ field; If only the domain name part
of full server name must the same with the value you set in
‘Server name’ field, select ‘Domain name must end in specified
name’.
After you complete all information related to the access point, click ‘OK’ to save the profile,
or click ‘cancel’ to cancel adding a new profile.
If the profile is created, you will see the information in the Profile List.
2-2-2 Using Windows Zero Configuration
Windows XP and Vista has a built-in wireless network configuration utility, called as
‘Windows Zero Configuration’ (WZC). You can also use WZC to configure your wireless
network parameter:
1. Right-click Airlive configuration utility icon and select ‘Use Zero Configuration as
Configuration utility’.