AirLive WN-300PCI - Manual (Page 8)

4
1.5 Familiar with your new wireless network card
1. Antennas
Two 3dBi dipole antennas are enclosed with the PCI card. Please secure the antennas to
Reverse SMA connectors of the card.
2. WPS Button
Press this button and hold for 3 seconds to start WPS function. When WPS is enabled, the
Link and Tx/Rx LEDs will be steadily on.
3. Link and Tx/Rx LED Definitions
LED Name Light Status Description
On Link to a wireless access point Link
Off Radio is switched to off.
Blinking Transferring / receiving data Tx/Rx
Off No wireless activity
3
1
2