AirLive WN-300PCI - Manual (Page 58)

54
WPA Pre-shared
Key Please input the WPA pre-shared key here. Only clients with
the same pre-shared key you inputted here will be able to
connect to your computer. This setting is only available when
you select one of WPA encryptions.
Group Rekey
Interval You can specify the time interval to re-issue the key to your
wireless clients here. You can click the button ’10 seconds’ or
‘Kpackets’ to change the unit of time interval. (every 10
seconds or a thousand data packets times the value you
specified in ‘Group Rekey Interval’ field).
Wep Key Please input the WEP encryption key here when you select
‘WEP’ as encryption type. There are 2 types of WEP key: Hex
(number 0 to 9, and ASCII characters A to F) and ASCII (all
alphanumerical characters plus symbols). Please select the
type of WEP key first, and then input the WEP key according to
the type of WEP key you selected.
If you want to use WEP 64 bits encryption, please input 10
characters if you select HEX, or input 5 characters if you select
ASCII. If you want to use WEP 128bits encryption, please input
26 characters if you select HEX, or input 13 characters if you
select ASCII. 128 bits encryption is safer then 64 bits, but the
data transfer speed will be slightly reduced.
Show Password
Check this box and the WPA pre-shared key or WEP key you
inputted will be shown, but not replaced by asterisk (*).
When you finish with setting and want to save changes, click ‘OK’ button, or click ‘Cancel’
button to discard all changes you made.