Autoquip GATES SLIDING - Manual (Page 3)

2
TOOL REQUIREMENTS
There are some other items you might want to consider that will help you with the installation. These
are:
Cables/Chain with 1000 Lb lifting capacity
Chain fall or Come-a-long
Fork
Lift
Sledge
Hammer
Safety Glasses Hard Hat (if job requires)
5/16” Hex head driver bit for TEK screws
Allen wrenches to 3/8”
Hammer
“C” Clamps
Hammer Drill & Bits
Carpenter
Square 4’ Level
Chalk
line 25’ Tape Measure
4” Angle grinder
Slip joint pliers
Drift punches
Open End wrench set to 3/4”
Drill Bits to 3/8”
Screw Driver set (flat and phillips)
Electric drill
Socket set, 1/4” & 3/8” drives
Hack Saw (or Port a Band)
Taps & tap wrench to 3/8”
Extension
cords Welding Equipment