Operating manual – BAND-IT BT1000 Boss Tool User Manual
Page 7
Advertising
BT1000
BOSS
TM
Tool
www.band-it-idex.com
Document # P98750 Rev. B
©
Copyright
BAND-IT-IDEX, Inc. 2013
All rights reserved
Page 7
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating Manual
BT1000 BOSS
TM
Tool Manual
Operation
3. Tensioning the band/strap
Press down the tension valve lever.
The lever is caught completely and the band is tensioned until
the air motor stalls. If the cycle has to be interrupted, the catch
has to be released to the left.
4. Sealing the band
The sealing valve lever is pressed down until the seal is
notched and the upper band sealed; the tensioning process is
interrupted (tension released) automatically.
Advertising