BAND-IT S100 Classic Air Tool - Manual (Page 16)

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925 Document # P09287 rev. L
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved
www.BAND-IT-IDEX.com
Page 16 of 18
S10099
Classic Air Tool
Repair Parts List
Junior Clamp Head
ITEM PART NO. DESCRIPTION QTY.
1 J93099 CUTTER / BLADE KIT 1
3 S18787 SCREW, SOC. HEAD CAP, ¼-28 X 1.75 2
4 S51287 HEAD, JR. PREFORMED CLAMP 1
6 J64887 SCREW, SET, #10-32 X 3/16 2
7 J00587 SHEAR HOOK 1
8 S11589 HANDLE ASSEMBLY 1
9 S18487 GRIP, HANDLE COVER 1
10 S52987 PIN, PIVOT, CAM 1
*11 J90887 PIN, PIVOT, SHEAR HOOK 1
12 S18687 DECAL, WARNING 1
KITS
- J93099 STANDARD CUTTER BLADE/ BACKING PLATE -
* SHEAR HOOK PIVOT PIN TO BE RETAINED BY USING MEDIUM STRENGTH
BLUE LOCTITE COMPOUND 242 OR EQUIVALENT.
INSTALLATION INSTRUCTIONS FOR CUTTER BLADE
AND BACKING PLATE
1. REMOVE OLD CUTTER BLADE SCREWS, CUTTER BLADE
AND BACKING PLATE.
2.
INSERT NEW SCREWS AND PUT ON NEW BACKING
PLATE WITH WORD “TOP” FACING UP (EITHER
DIRECTION) AS SHOWN.
3.
PUT NEW CUTTER BLADE ON WITH SLOT FACING UP AS
SHOWN AND TIGHTEN SCREWS.
4.
ALWAYS REPLACE ALL PARTS AS A KIT.