Carbolite ABA 7/35B - Manual (Page 49)

49 MF60 – 1.04
16.2.3
17 Internal Balance Commands
The balance command screen is accessible via:
Home Screen
→ Main Menu → Balance Menu
The screen is shown in Screen-view 17.1.1. The balance commands are:

Tare

Calibrate

Adjust Filter
If the balance is operating normally, then the balance status will display ‘Ready’. If
communication is lost between the balance and the controller, the balance status will display
‘No reply to setup command’ and the cable between the controller and balance should be
checked.
17.1.1 Screen-view: Balance Control Screen - idle