Carbolite ABA 7/35B - Manual (Page 51)

51 MF60 – 1.04
17.3.1 Screen-view Balance Control Screen - Calibration
17.4 Filter Setting
The white number box, next to Filter Setting screen label, can be touched to change the
balance filter setting. The controller will display the number pad and a value from 1 to 3 can be
entered. The effect of the filter numbers are explained below:
1 = minimal filter – fastest response (default setting after power up)
2 = medium filter
3 = maximum filter
– slowest response
When a filter setting is changed the status will read ‘Setting filter x’ then ‘Filter x set’, followed by
‘Ready’, where x is the filter number being set.