Bosch 4405 - Manual (Page 23)

23.
Basic Saw Operations
Sliding Fence
Sliding Fence
Operating Sliding Fence
1. Turn the fence lever counter clockwise.
2. Slide the fence to the desired position.
3. Turn the fence lever clockwise
to tighten.
Removing the Sliding Fence
1. Lift up on the cover plate tab and
rotate clockwise.
2. Turn the fence lever counter clockwise.
3. Slide the fence as far as it will go to the left.
4. Lift up on the sliding fence to remove.
Adjusting the Sliding Fence
Lock - Make lock tighter
1. Remove the sliding fence.
2. Push down on the locking block to expose the
screw head.
3. Turn the screw counter clockwise to move it to
the next hex setting.
4. Replace the sliding fence
5. Check the clamping force in several positions.
Be sure the lever does not block the
clamp hole.
Adjusting the Sliding Fence
Lock - Make lock looser
1. Remove the sliding fence.
2. Push down on the locking block to expose the
screw head.
3. Turn the screw clockwise to move it to the next
hex setting.
4. Replace the sliding fence
5. Check the clamping force in several positions.
Be sure the lever does not block the clamp hole.
Figure 25: Sliding Fence
Sliding Fence
Cover Plate Tab
Fence
Lever
Fence
Lever
FRONT VIEW
REAR VIEW
Locking Block