CHAMPION EUCC Series - Manual (Page 33)

25
4 Inspect the route that sections
must travel if the shipment was
not delivered to the dishwashing
room. Measure allpassageways
and doors before moving the
dishwasher.
5. Piping on the rear wall of the
dishwasher may be removed to
allow the dishwasher to pass
through narrow openings if
necessary.
6. Compare the location of the site
utilities with the Plumbing and
Electrical Connection Diagram,
(P&E).
IMPORTANT
Check the utilities early
Incorrect voltage, hot water supply,
or steam piping may delay the
completion of the installation
_________ Installation Instructions

Installation
Unpack and Place
CAUTION
Use extreme care when lifting
a section off its pallet to prevent
damage to the dishwasher.