Printing the network configuration page – Brother HL 3070CW User Manual
Page 133
Control panel features
123
8
Printing the Network Configuration page
8
Note
Node name: Node name appears on the Network Configuration page. The default node name of the print
server in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless
network (For HL-3070CW).
The Network Configuration page prints a report listing all the current network settings. You can print the
Network Configuration page using the control panel.
a
Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine to take the
machine off-line.
d
Press + or - to choose Machine Info..
Press OK.
e
Press + or - to choose Print NetSetting.
Press OK.
Note
If the IP Address on the Network Configuration page shows 0.0.0.0, wait for one minute and try again.