Brother HL 3070CW - Manual (Page 89)

Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
79
5
k
Read the Important Notice to enable the wireless interface. Check the box after you confirm the
wireless setting is enabled, and then click Next.
l
You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as the SSID, channel, authentication and encryption
of your computer.(See your note on page 76.) You will need them to return your computer back to its
original wireless settings, and then click Next.