Brother HL 3070CW - Manual (Page 87)

Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
77
5
Configure the wireless settings
5
a Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network, press OK.
Press + or - to choose WLAN, press OK.
Press + or - to choose WLAN Enable, press OK.
Choose On.
d Turn on your Macintosh.
e
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
f
Click Install Printer Driver on the menu screen.
g
Click Wireless Network users.