Brother HL 3070CW - Manual (Page 32)

Configuring your machine for a wireless network (For HL-3070CW)
22
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a
Confirm your network environment. (See page 24.)
b Confirm your wireless network setup method. (See page 25.)
c
Configure your machine for a wireless network. (See page 28.)
Wireless configuration and installing printer driver have been completed.
o Infrastructure mode
Connected to a computer with an access point or
o Ad-hoc mode See page 23.
Connected to a wireless capable computer without
an access point
Using the Brother
installer application
(Recommended)
Using the
SES/WPS/AOSS control
panel menu
(if your wireless access
point supports either
SecureEasySetup™,
Wi-Fi Protected Setup
or AOSS™)
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
Temporarily using a
network cable
Using the
SES/WPS/AOSS
control panel menu
Configuring your machine for a wireless network
(For Windows ® )
See page 29.
(For Macintosh)
See page 60.
(For Windows ® )
See page 40.
(For Macintosh)
See page 70.
See page 88. See page 98.
Installing the printer driver
(For Windows
®
) See page 57.
(For Macintosh) See page 86.
(For Windows ® )
See page 91.
(For Macintosh)
See page 95.
(For Windows ® )
See page 100.
(For Macintosh)
See page 104.