COATS 6200HS Truck Wheel Balancer - Manual (Page 17)

Operation Guide
11
7. Attach the Weight.
a. Starting with either side of the wheel, rotate the
wheel in the direction of the lit arrow until all 6
Arrow Indicators and the Top Dead-Center Indicator
are lit. The correct balance weight will now be
displayed.
b. Securely apply the displayed weight at the top-
dead-center location on the indicated side of the
wheel.
c. Repeat steps 7a and 7b for the other side of the
wheel.
8. Do a Check Spin
Repeat the spin cycle (step 6). Zero weight readings
should appear for both sides of the rim.
Optional: If desired wheels may also be Fine Balanced
to 2 gram (Car/Light Truck) or 5 gram (Truck) accuracy.
Press the Fine Button on the left side of the Control
Panel. It is necessary to spin the wheel again when
the Car LED is lit, as the balancer calculates the fine
balancing requirements from the previous
measurements, and the Display will show the weight
requirements. When balancing Truck wheels, it is
necessary to re-spin the wheel after switching to Fine.
If a repeatable balance can not be achieved, there is a
possibility of foreign material moving around inside of
the tire causing a different imbalance every time. This
material must first be removed before the wheel can
be balanced.