COATS 6200HS Truck Wheel Balancer - Manual (Page 22)

16
Coats Model 6200HS
5. Spin the Wheel.
Complete normal balance routine.
6. Attach the Weight.
Starting with either weight location, rotate the wheel
until the TDC position is found. Attach the weight as
indicated in the Display Panel.
N.B. If
the weight is not
attached at the correct locations (as measured),
accurate balance results will not be achieved. Repeat
this step for the other weight location.
7. Do a Check Spin.
Repeat the normal balance routine. Zero weight
readings should appear for both weight locations.