CounterPath Bria 3.5.2 for Windows User Guide - Retail Deployments - Manual (Page 70)

CounterPath Corporation
66
Session timer preference This field specifies your preference for which party should send the refresh. The preference is not
a guarantee that the refresh will be performed by the specified party. The choices are:
• None: No preference.
• Local refreshes: Your computer sends.
• Remote refreshes: The other party sends.
• UAC refreshes: The user agent client (the party that initiated establishment of the
communications) sends.
• UAS refreshes: The user agent server (the other party) sends.
Hold Method Change this setting only if your VoIP service provider advises you to do so.
Send SIP keep-alives Typically on, to instruct Bria to send SIP keep-alive messages in order to maintain a “pinhole”
through your firewall for SIP messaging.
Use rport Typically on.
Send outgoing request
directly to target When checked, requests with a complete URI ([email protected]) go to ABC.com and the “Send
outbound via” field on the Account tab (page 53) is ignored.
If you check this field, make sure you also set “Send outbound via” (on SIP Account > Account)
to “Domain”.
Typically off. This field is intended for test labs and may cause problems in a NAT environment.
Table 9: SIP Account Properties – Advanced
Field Description