Daisy PowerLine 693 - Manual (Page 7)

WARNING: Once a Quick Change Clip with BBs is inserted into the gun it is
considered to be loaded, so use extreme caution in handling of the gun. Keep the
gun pointed in a safe direction. Never point the gun at anyone.
Always treat the gun
as if it were loaded and ready to fire.
IMPORTANT: Make sure that the Quick Change Clip is snapped down into
position fully. It is important that both the front end and rear ends of the Quick
Change Clip are latched into position (see Fig. 11).
STEP 5. AIM AT A SAFE TARGET
To be a consistent marksman, use the correct sight picture each time you fire the
pistol (see Fig 12).
CAUTION: Due to the power of the Model 93/693, use extra precaution in
selecting a safe target. Improper targets may cause ricochet.
STEP 6. TAKE “OFF” SAFETY – POSITION SAFETY LEVER TO “FIRE”
When you are certain that the target, backstop
and surrounding area are safe, rotate the safety
clockwise toward the “FIRE” position (see Fig. 13).
Pulling the trigger now will fire the gun.
WARNING: Use extreme caution in operating
because the gun is now ready to fire when the
trigger is pulled.
7
FIG. 11
FIG. 13
FIG. 12
NOTE THE
INCORRECT
POSITIONS
OF THE
QUICK
CHANGE
CLIP
INCORRECT SIGHT ALIGNMENT CORRECT SIGHT
ALIGNMENT
CORRECT SIGHT
PICTURE