Dascom 7010 PrintServer Manual - Manual (Page 47)

Print Server Installation
Print Server User Manual 47
PRINTSERVER Print Monitor
Automatic
Installation
When the PRINTSERVER Printer Wizard is run (see:
Ö
44), the
PRINTSERVER Print Monitor will be installed automatically to your
system.
The automatic installation is only carried out if the PRINTSERVER
Printer Wizard was started via the PRINTSERVER LIBRARY CD.
Manual Installation If the PRINTSERVER Print Monitor is not yet installed to your system
or if you want to install a higher version of the PRINTSERVER Print
Monitor, you can do this manually.
Proceed as follows:
1. Double-click the file pmonitor-xxx.exe'.
The file can be copied and started from or the PRINTSERVER LIBRARY CD.
2. Follow the installation routine.
ª
The PRINTSERVER Print Monitor will be installed to your system.
Starting the PRINTSERVER Print Monitor (no Print Object available)
The PRINTSERVER Print Monitor is started by adding a new print
object with a port.
Requirements
;
The PRINTSERVER Print Monitor is installed on the client.
;
The required printer drivers are installed on the client.
Proceed as follows:
1. Click 'Start' > 'Settings' > 'Printers and Faxes'.
2. Select File – Add Printer from the menu bar.
The 'Add Printer Wizard' appears.
3. Click Next.
4. Tick Local printer attached to this computer.
5. Click Next.
6. Tick Create a new port.