Dascom 7010 PrintServer Manual - Manual (Page 70)

Device Settings of the Print Server
Print Server User Manual 70
Configuring the Device Language via the PRINTSERVER-NetTool
The setting has no effect on the language of the
PRINTSERVER-NetTool.
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – General from the navigation bar.
4. Select the desired language from the Print server language list.
5. Click OK to confirm.
ª
The settings are saved.