ElmoMC Gold Line Digital Servo Drives-Gold Cello - Manual (Page 57)

Gold Cello Installation Guide
MAN-G-CELIG (Ver. 1.201)
||Powering Up| www.elmomc.com
57
Table of Contents
6.13. Powering Up
After the Gold Cello is connected to its device, it is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified range
and that the proper plus-minus connections are in order.
6.14. Initializing the System
After the Gold Cello has been connected and mounted, the system must be set up and initialized.
This is accomplished using the EASII, Elmo’s Windows-based software application. Install the
application and then perform setup and initialization according to the directions in the EASII User
Manual.