ElmoMC ExtrIQ Digital Servo Drives-Eagle - Manual (Page 76)

Eagle Installation Guide Technical Specifications
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
76
4.3.2. Velocity Loop
Feature Details
Controller type PI
Velocity control • Fully digital
• Programmable PI and FFW control filters
• "On-the-fly" gain scheduling
• Automatic, manual and advanced manual tuning
Velocity and position feedback
options
• Incremental Encoder
• Absolute Encoder- Heidenhain and Stegmann
• Digital Halls
• Interpolated Analog (sin/cos) Encoder (optional)
• Resolver (optional)
• Tachometer and Potentiometer (optional)
Velocity loop bandwidth < 350 Hz
Velocity sampling time 140 to 200 µsec (x2 current loop sample time)
Velocity sampling rate Up to 8 kHz; default 5.5 kHz
Velocity command options • Analog
• Internally calculated by either jogging or step
Note: All software-calculated profiles support
on-the-fly changes.
4.3.3. Position Loop
Feature Details
Controller type “1-2-4” PIP
Position command options • Software
• Pulse and Direction
• Analog Potentiometer
Position loop bandwidth < 80 Hz
Position sampling time 280 to 400 µsec (x 4 current loop sample time)
Position sampling rate Up to 4 kHz; default 2.75 kHz