ElmoMC ExtrIQ Digital Servo Drives-Hawk - Manual (Page 78)

Hawk Installation Guide Technical Specifications
MAN-HAWIG (Ver. 1.401)
www.elmomc.com
78
4.10. Communications
Specification Details
RS-232 Signals:
• RxD , TxD , Gnd
• Full duplex, serial communication for setup and control.
• Baud Rate of 9,600 to 57,600 bit/sec.
CAN CAN bus Signals:
• CAN_H, CAN_L, CAN_GND
• Maximum Baud Rate of 1 Mbit/sec.
Version:
• DS 301 V4.01
Layer Setting Service and Protocol Support:
• DSP 305
Device Profile (drive and motion control):
• DSP 402
4.11. Pulse-Width Modulation (PWM)
Feature Details
PWM resolution 12-bit
PWM switching frequency on the load 2/Ts (factory default 22 kHz on the motor)