Equity by La Crosse 65903 Solar Desktop LCD Alarm - Manual

SOLAR HYBRID ALARM CLOCK
Model: 65903
FUNCTION:
1. Solar power and battery operated
day, date and alarm time or temperature (selectable)
2. 5 minutes repeating snooze
3. Green LED back-light
4. 12 hour or 24 hour format
BATTERY AND SOLAR POWER COSUMPTION AND UTILIZATION
This clock is designed to operate using two 1.5V alkaline batteries and solar power. It automatically switches between solar and
battery power depending in the lighting conditions and will extend normal battery life to 4-5 years if the clock is used in light at least
2000 lux for 10 hours per day,
INSTALL THE BATTERIES
1. Remove the battery compartment cover on the base of the clock.
2. Insert 2 PCS “AA” (1.5V) ALKALINE batteries noting the polarity as indicated inside the batteries compartment.
3. Replace the battery compartment cover.
SETTING THE CALENDAR
1. Press the RESET button (Located on the base of the clock) - to do this. Use a pin to push through the hole, The clock will now,
beep and display at 12:00 AM.
2. Slide the LOCK/ALARM/DATE/TIME switch (A) to the DATE SET position and the year/day/date digits will begin to flash .
3. Press the 12-24HR/YEAR button (C) to set the year.
4. Press the MINUTE/DATE button (D) to set the date.
5. Press the HOUR/MONTH button (E) to set the month.
6. After the CALENDAR has been set, slide the LOCK/ALARM/DATE/TIME switch to the LOCK position.