Equity by La Crosse 40222B Insta-Set Analog Clock - Manual

AUTO-SET by EQUITY
SETS THE CORRECT TIME WHEN POWERED UP!
MODEL 40222S/40222B
OPERATING MANUAL
POWER REQUIREMENT
One 3v Lithium Battery CR2032 is required to hold the time memory. The lithium battery
is included.
Two “AA” Alkaline batteries are required to operate the time function. These batteries
are not included.
TIME ZONES
H-Hawaii-Aleutian Standard Time
A-Alaska Standard Time
P-Pacific Standard Time
M-Mountain Standard Time
C-Central Standard Time
E-Eastern Standard Time
SETTING PROCEDURE FOR THE AUTO-SET CLOCK
BEFORE inserting the “AA” batteries into the battery compartment
•
Make sure that the clock hands are in the 12:00 position
•
The Mode switch (8) should be in the SET position
•
Slide the time zone switch (2) to the correct time zone
•
Slide the DST witch (9) to the appropriate position for your area
•
Verify that the rear LCD display (4) reads the correct time
•
Once all above is complete, insert the “A” batteries; slide the mode switch (8)
to the run position, the clock will fast forward to the correct time