EUCHNER AS - Manual (Page 26)

Safety Monitors - AS-i Quick Reference - 08/2014 26
3.9 Diagnostics of slaves in Safety Monitor
1. Press OK-button
2. Select DIAGNOSIS and press OK-button
3. Select SAFETY SLAVES and press OK-button
4. Select AS-I circuit in which is the Slave and press OK-button
5. With the arrow-buttons up and down
X
=> channel is OK
R => channel has released
ON => output on
OFF => output off
? => output state unknown
1 OFF 2 OFF
3 OFF 4 OFF
PROFIBUS
QUICK SETUP
AS-I SAFETY
DIAGNOSIS
SLAVE ADR TOOL
TEST
SETUP
DISP CONTRAST
SAFETY SLAVES
INT MONITOR
EXT MONITOR
FAULT DETECTOR
…
SAFETY ORIENTED
SLAVES
1-
 2-XX
3-RR

4-XX
5-ON

6-
…
AS-I CIRCUIT 1
AS-I CIRCUIT 2